Přejít na obsah
  • Vytvořit účet
irfant

Detailed cleaning on Roomster...

    Doporučené příspěvky

    Foam wash + engine bay cleaning + claying + Swirl Removing (Turtle Wax ) + Turtle Wax Nano Tech wax application

    (I use Einhell orbital buffer, a cheap one (500 rpm max, 120 watt)

    And the story looks like... :palec2:

    dscn4755kv6.jpg

    dscn4763ll9.jpg

    dscn4767iq8.jpg

    dscn4776yc6.jpg

    dscn4782lo3.jpg

    dscn4792ct6.jpg

    dscn4803nb7.jpg

    dscn4774ve2.jpg

    Sdílet tento příspěvek


    Odkaz na příspěvek
    Sdílet na ostatní stránky

    Looks awesome, especially when considering that polishing machine :palec2: How difficult is the claying if you do that never before?

    Sdílet tento příspěvek


    Odkaz na příspěvek
    Sdílet na ostatní stránky
    Looks awesome, especially when considering that polishing machine :palec2: How difficult is the claying if you do that never before?

    Claying is very very easy...

    Just mist with the spray than go with clay bar...

    Thoroughly wash and dry your vehicle. (To save time, many professionals clay the paint after the final rinse, while it's still wet).

    Cut your clay bar into halves or thirds, so if you accidentally drop the bar (it will happen) you'll only lose a small portion. If a clay bar is dropped on the ground, it is contaminated and must be thrown away.

    Always work on the vehicle in the shade, and out of the wind to save on lubricant. Spray the lubricant over a 2' x 2' area. Tuck the clay bar tucked into the palm of your hand and glide it across the lubricant.

    I prefer back and forth movements to keep track of finished areas. If you are claying the entire vehicle, start from the top and work your way down to the lower sections. Use one side of the clay until it stops picking up the contaminants, and then turn it over to the fresh side.

    When the second side is full of contaminants, you can knead the clay to produce two fresh surfaces. The average clay bar should clean 5 to 10 cars, depending on the amount of contamination.

    Continue around the car until all painted surfaces have been clayed. You can also clay your glass, chrome, metal pieces and coated wheels. Your car should now be smooth and ready to be polished and waxed.

    SONGreenClay2.jpg

    Clay removes:

    Tree sap mist

    Paint overspray

    Industrial fallout

    Hard water deposits

    Diesel fuel exhausts

    Rubber particles from other cars

    Insect droppings

    Bug remains

    And much more!

    Sdílet tento příspěvek


    Odkaz na příspěvek
    Sdílet na ostatní stránky

    I was rather wondering about the claying itself, but thanks 4 great and comprehensive info anyway! :)

    Sdílet tento příspěvek


    Odkaz na příspěvek
    Sdílet na ostatní stránky
    I was rather wondering about the claying itself, but thanks 4 great and comprehensive info anyway! :)

    I strongly recommend claying before polishing or waxing. It has tremendous effect on surface roughness. :palec2:

    After few passes you can feel the cleaned surface on your finger tips. You can easly find on E-bay etc.

    Don't forget to order a clay lubricant (like Meguiars Quick Detailer) together with a clay bar. ;)

    Sdílet tento příspěvek


    Odkaz na příspěvek
    Sdílet na ostatní stránky

    Pokud chcete odpovídat, musíte se přihlásit nebo si vytvořit účet.

    Pouze registrovaní uživatelé mohou odpovídat

    Vytvořit účet

    Vytvořte si nový účet. Je to snadné!

    Vytvořit nový účet

    Přihlásit se

    Máte již účet? Zde se přihlašte.

    Přihlásit se

    ×